PERFORMANCE PARTS FOR YOUR CLASSICS!
Local: 714-278-0098 TF: 800-638-1703
Home / Suspension Parts / 1962-74 Mopar, Plymouth, Dodge, Chrysler / 1967-73 Dodge Charger Drag Pac Suspension Kit
Caltracs

1967-73 Dodge Charger Drag Pac Suspension Kit

1967-73 Dodge Charger Drag Pac Suspension Kit
Part #:DP6773S
$1394.12
Leaf Spring Height

Details

Street or Strip,  you'll leave the competition behind!  Performance Online's new Drag Pack gives your suspension just what it needs to stay in front.

Drag Kit Includes:

Rear Split Mono Leaf Springs:
The Split-Mono leaf spring overlaps 12", extending 6" on each side of the axle tube. The overlap extends over the high stress area of the spring emulating a parabolic type spring.

  •  Energy Suspension poly urethane bushings supplied for rear eyes.
  •  Split-Mono leaf springs made to work in conjunction with our traction bars.
  •  200lb. - 225lb. Spring Rate
  •  Ride height options are stock and 1" lowered.
  •  Substantially lighter than multi-leafs for unsprung weight savings.
  •  Heavy duty alignment spring pins & clamps.\
  •  Due to the nature of these springs, requires center bolt modifications & grinding to fit.


TESTED:  These have been proven to withstand over 1200 HP and quarter mile ET's in the low 9's!

Cal Trac Traction Bar Kit

The combination of these components change the pushing point on the car by redirecting the turning action (spring wrap-up) of the rear axle through the #2 Force Transfer Link into the #1 Front Pivot. (See detailed image below). The Front Pivot Spring Stop resists this turning motion and also controls the bending of the leaf spring at it's thinnest section. The push into the Front Pivot helps the cars weight shift towards the rear of the car, because of new directed angle of force toward the front of the vehicle. (The 'Instant Center' moves further forward). This is where the system emulates a Four link system. The pinion angle is also maintained.

Calvert Racing CF Series 90/10 Front Drag Race Shocks

  • Manufactured to perform right out of the box.
  • Fastest rate of separation over any other shock on the market today. 
  • Dual Stage Compression Valving - High speed compression valving will keep the front end from bottoming out on hard landings
  • Absorbs hard hits & settles on the top end
  • Light weight design

Calvert Racing CR Series 9 Way Adjustable Rear Shocks

  • 9-way adjustable
  • External dial for easy adjust ability
  • Dial primarily adjusts rebound enabling driver to control rear body separation
  • Heavy duty industrial steel bodied design
  • Great for street/strip use

Product fits: 1967 68 69 70 71 72 73 Dodge Charger

CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

Suggested parts